Your current location:Home > Products > Electric pneumatic series > Attachment 4- Air source
Attachment 4- Air source
134-5173-9957
Service hotline

First、Product overview:

  Pneumatic triplet is the most common accessories in pneumatic valves, its role can be simply summarized as: filtration (F)+ decompression (R)+ oil mist (L). The pressure reducing valve is a must accessory, no matter what function of the pneumatic valve must be configured, its role is to give the pneumatic valve a standard power source pressure, the standard value is 0.4-0.7MPa.

  1.Air filter: Used to clean the air source, can filter the water in the compressed air, avoid the water with the gas into the device.

  2.Pressure reducing valve: It can regulate the pressure of the air source, so that the air source is in a constant state, which can reduce the damage to the valve or actuator and other hardware when the air pressure changes. The filter is used to clean the air source. It can filter the water in the compressed air and avoid the water entering the device with the gas.

  3.Oil mist: can lubricate the moving parts of the body, can lubricate the parts that are not convenient to add lubricating oil, and greatly extend the service life of the body.

Second、Instructions for installing air source handling parts:

  a.Filter drainage has pressure difference drainage and manual drainage two ways. Manual drainage must be discharged before the water level reaches the level below injection molding.

  b.Pressure regulation, before turning the knob, please pull up and then rotate, press down the rotary knob for positioning. Turn the button to the right to increase the outlet pressure, turn the button to the left to reduce the outlet pressure. Adjust the pressure should be gradually and evenly adjusted to the required pressure value, should not be adjusted in place one step.

  c、The oil feeder uses JIS K2213 oil (ISO Vg32 or equivalent oil). Please do not exceed the cup eight times full. The number 0 is the least oil and 9 is the most oil. Do not rotate from position 9-0, rotate clockwise

  

Attachment 4- Air sourceAttachment 4- Air source

 Attachment 4- Air source

Attachment 4- Air source

Attachment 4- Air source

Attachment 4- Air source 



  Notice to quotation: Optional accessories: solenoid valve, limit switch, two couplings

  Please try to provide detailed parameters about each standard pneumatic ball valve, to facilitate our technical personnel for your accurate selection.

Contact
Add:No. 5 Jinrui Road, Taiping Street, Xiangcheng, Suzhou
Phone:134-5173-9957/137-7173-1865
Tel:0512-6599 1358
Fax:0512-6599 3982
Copyright © 2022 Suzhou BeiLi Fluoroplastic Products Co., Ltd All Rights Reserved. Filing number:苏ICP备2020053433号
134-5173-9957