Fluorine lined valve series_Suzhou BeiLi Fluoroplastic Products Co., Ltd

Product Center

Service hotline：

134-5173-9957

Fluorine lined check valve H41

134-5173-9957

Service hotline

Product introduction

※ Product name: Fluorine lined horizontal check valve
※ Product model：H41F46-16C
※ Product specification：DN15-200
※ Shell material: carbon steel、304、316L
※ Lining material：FEP（F46）、PFA

First, product characteristics

Fluorine lined check valve (also known as check valve) the role of this type of valve is to allow the medium to flow in only one direction, and to prevent the direction of flow.

Second, the working principle

Lining check valve only allows media to flow in one direction and prevents fluid backflow. Usually, this valve works automatically, under pressure in one direction, valve disc opens, fluid flows in the opposite direction when fluid pressure and valve disc, PTFE valve ball weight, hand seat to cut off flow.

Product parameter

First, the main parts of the material table

Part name	Investment cast ductile iron	Carbon steel	Stainless steel
Part name	QT	C	P	R	PL	RL
Body, cover, disc	QT400	WCB	CF8	CF 8M	CF3	CF3M
Lining material	FEP(F46)、PTFE（F4）、PFA(soluble polytetrafluoroethylene), PO(polyolefin), PE(ultra-high molecular weight polyethylene)
bolt	35	35	1Cr17Ni2	1Cr17Ni2	1Cr18Ni9	1Cr18Ni9
nut	45	45	0Cr18Ni9	0Cr18Ni9	0Cr18Ni9	0Cr18Ni9

Technical standard
Design and manufacture	GB/T12235 GB/T12236
Structural length	HG/T3704-2003 GB12221ASME B16.10
Flange size	GB/T9113.1、ANSI B16.5a
Structural form	Lift vertical, rotary, lift straight through
Nominal pressure	0.6、1.0、1.6、2.5MpaClass150 JIS 10K
Pressure test	GB/T13927-92API598

Basic model
H41F4	H42F4	H441F4
H41F46	H42F46	H44F46
H41PFA	H42PFA	H44PFA

Second, pressure temperature curve

Third, the material list

Nominal diameter		DN15-DN400
pressure		1.0Mpa 1.6Mpa 150LB
Serial number	name	Material details
1	Body, disc, cover	A216WCB+Lining material	A351 CFB/A351 CF8M+Lining material	A351 CF3/A351CF3M+Lining material
2	The ball	PTFE
3	Lining material	FEP PFA GXPO
4	bolt	A193 B7	A320 B8	A193 B8M

Fourth, technical performance specification

Design standard		HG/T 3704 GB/T 12235		AP16D
Structural length		HG/T 3704 GB/T 12221		ASME B16.10
Flange size		HG/T 20592 GB/T 9119		ASME B16.5 JIS B2220
Inspection and test		GB/T 13927 JB/T 9092		API 598
Nominal pressure（MPa）		1.0	1.6	150LB
Experimental pressure （MPa）	Shell pressure test	1.5	1.5	1.5
	High pressure seal	1.1	1.1	1.1
	Low pressure seal	0.6	0.6	0.6
Applicable temperature ℃		PFA -30~200 FEP -30~150 GXPO -10~80
Applicable medium		Hydrochloric acid, nitric acid, hydrofluoric acid, liquid chlorine, sulfuric acid, aqua regia and other strong corrosive media

Note: The pressure test and tightness of the fluorine lined valve shell are tested according to the data in the above table. The test standard is only for reference to the general valve standard. The high pressure requirements are customized and processed.

Fluorine lined national standard lift check valve

HG/T 20592 PN10 unit：mm

DN	L1	L2	D	D1	D2	N-Фd	f	b	H	Wt(Kt)
15	130	110	95	65	45	4-14	2	14	82	6.5
20	150	117	105	76	55	4-14	2	14	82	5
25	160	127/100	115	86	65	4-14	2	14	98	6
32	180	140/110	140	100	78	4-18	3	16	110	7.5
40	200	165/125	150	110	85	4-18	3	16	118	9.5
50	230	178/140	165	125	100	4-18	3	16	138	13
65	290	190/160	185	145	120	4-18	3	18	156	19.5
80	310	203/185	200	160	135	8-18	3	20	160	27
100	350	229/210	220	180	155	8-18	3	20	185	35
125	400	280/250	250	210	185	8-18	3	22	208	56
150	480	300	285	240	210	8-23	3	24	245	75
200	600	380	340	295	265	8-23	3	26	298	118
250	670	420	395	350	320	12-23	4	28	342	165
300	850	425	445	400	368	12-23	4	28		210

HG/T 20592 PN16 unit：mm

DN	L1	L2	D	D1	D2	N-Фd	f	b	H	Wt(Kt)
15	130	110	95	65	45	4-14	2	14	82	4
20	150	117	105	75	55	4-14	2	14	82	5
25	160	127/100	115	85	65	4-14	2	14	98	6
32	180	140/110	140	100	78	4-18	3	16	110	7.5
40	200	165/125	150	110	85	4-18	3	16	118	9.5
50	230	178/140	165	125	100	4-18	3	16	138	13
65	290	190/160	185	145	120	4-18	3	18	156	19.5
80	310	203/185	200	160	135	8-18	3	20	160	27
100	350	229/210	220	180	155	8-18	3	20	185	35
125	400	280/250	250	210	185	8-18	3	22	208	56
150	480	300	285	240	210	8-23	3	24	245	75
200	600	380	340	295	265	12-23	3	26	298	118
250	670	420	405	355	320	12-25	4	28	342	165
300	850	425	460	410	375	12-25	4	29

Fluoro-american standard lift check valve

HG/T 20592 PN25 unit：mm

DN	L1	L2	D	D1	D2	N-Фd	f	b	H	Wt(Kt)
15	130	110	95	65	45	4-14	2	16	82	6.5
20	150	117	105	75	55	4-14	2	16	82	7
25	160	127/100	115	85	65	4-14	2	16	98	8
32	180	140/110	140	100	78	4-18	3	18	110	11
40	200	165/125	150	110	85	4-18	3	18	118	15
50	230	178/140	165	125	100	4-18	3	20	138	17.5
65	290	190/160	185	145	120	8-18	3	22	156	26
80	310	203/185	200	160	135	8-18	3	22	160	36
100	350	229/210	235	190	160	8-23	3	24	185	44
125	400	280/250	270	220	188	8-25	3	28	208	60
150	480	300	300	250	218	8-25	3	30	245	81
200	600	380	360	310	278	12-25	3	34	298	137
250	670	420	425	370	332	12-30	4	36	342	173
300	850	425	485	410	375	16-30	4	39

ASME B16.5 Class150 unit：mm

DN	L1	L2	D	D1	D2	N-Фd	f	b	H	Wt(Kt)
1/2	130	110	89	60.5	35	4-16	2	12	82	4
3/4	150	117	98	70.0	43	4-16	2	12	82	5
1	160	127/100	108	79.5	51	4-16	2	12	98	6
1¹/4	180	140/110	117	89.0	64	4-16	2	13	110	7.5
1¹/2	200	165/125	127	98.5	73	4-16	2	15	118	9.5
2	230	178/140	152	120.5	92	4-19	2	16	138	13
2¹/2	290	190/160	179	139.5	105	4-19	2	18	156	19.5
3	310	203/185	190	152.5	127	4-19	2	19	160	27
4	350	229/210	229	190.5	157	8-19	2	24	185	35
5	400	280/250	254	216.0	186	8-22	3	24	208	56
6	480	300	279	241.5	216	8-22	3	26	245	75
8	600	380	343	298.5	270	8-22	3	29	298	118
10	670	420	406	362.0	324	12-25	3	31	342	165
12	850	425	485	432	381	12-25	4	34.5		205